Monitoring Of Nitrifying Processes In Ground Water By Ion Chromatography

Abstract

The removal of ammonia from mineral medium containing known concentrations of ammonia (up to 300 mg/L) and from ground water by biological oxidation was studied. Nitrifying bacteria were isolated from ground water containing ammonia.

Ammonium ion was determined by a standard titration technique while nitrite and nitrate ions were determined by ion chromatography (IC Supersep anion column) using 1.5 mM phtalic acid solution containing 5 % acetonitril as eluent.

Depending on its concentration in water biooxidation of ammonia lasted from 48 hours till three weeks.     

Evaluation of the Fate of Aldicarb and Its Metabolites in Oranges

Abstract

The accumulation, persistence and fate of systemic pesticide aldicarb was melencholy evaluated in orange crops. The concentration of this pesticide and its two toxic metabolites, aldicarb sulfoxide and aldicarb sulfone was determined in leaves, rind and pulp of three orange varieties (Satsuma, Navelina and Clemetina de Nules) and in the top soil of the orange groves. The groves were located in two different places in the Valencia Community (Spain). The analysis showed that the aldicarb concentration was lower than those of aldicarb sulfoxide and aldicarb sulfone. In all cases, the residues persisted at least 160 days in vegetable samples and between 157 and 227 days in soil samples. Residue concentrations measured in the soil samples were highly variable but a relation with the organic matter content can be observed. The residue levels found in vegetal products were higher in leaves than in rind, and in rind than in pulp. The maximum residue values were obtained between 47 and 70 days after the application. One hundred days after treatment (Security period) the residue levels of total fruit were lower than the maximum residue level of 0.2 mg/kg established by law.     

Analysis of PCBs in Biotic Matrices by Two-Dimensional GC-ECD

Abstract

The suitability of three GC-ECD systems for the separation of a model mixture containing various congeners of PCBs together with persistent chlorinated aromatics (pesticides and their metabolites, industrial chemicals) was tested. Analyses were performed on two parallel capillaries, the stationary phase of one of them was always in routine practice very common 5% phenyl-methylpolysiloxane, the second one was either 50% phenylmethylpolysiloxane or 7% phenyl-7% cyanopropyl-methylpolysiloxane. The number of unresolved (coeluted) analytes was significantly reduced in these systems and thus unbiased quantitation of PCBs and other components used for regulation was possible. The utilization of this type of multidimensional chromatography for rapid and reliable analysis of real samples (fish oil, human fat) was documented.     

Interference of Transformer oil Matrices to the Internal Standards on PCB Quantification

Abstract

Polychlorinated biphenyls (PCBs) are toxic, perssstent, global environmental contaminants which were formulated as complex mixtures of congeners. Many methods have been developed in the past to analyze PCB in transformer oil samples for regulatory purposes. The most important consideration in the cleanup procedure is the ability to remove the oil from the sample matrix, since trace amount of oil will interfere with the subsequent GC-MS analysis. Electron capture detection (ECD) has been the most common method for gas chromatographic analysis of PCBs because of its high sensitivity toward halogenated compounds. ECD can also respond to some non-PCB compound resulting in biased concentrations of PCB. In this work, a two-stage cleanup method, using DMSO liquid/liquid extraction and HPLC column chromatography. has been applied to two types of transformer oil. Five internal standards have been selected to show their performance in the presence of different oil matrices. The comparison of the PCB quantification at different conditions for GC-MS and GC-ECD will be demonstrated.     

A Ten Years Monitoring of Chlorofluorocarbons at the Antarctica: Results and Perspectives

Abstract

Chlorofluorocarbons are man-made long lasting atmospheric pollutants of great environmental concern, responsible for important global change phenomena. Recently, they were replaced by hydrogenated halocarbons that, even if less persistent, do not lack in environmental impact. Atmospheric concentrations of these compounds were measured in Antarctica by gas chromatography. The extremely low atmospheric mixing ratios of these compounds require a pre-concentration step of the air sample on suitable adsorbent in order to meet the sensitivity of the analytical method Results obtained analyzing air samples collected in Antarctica since 1988 for the determination of CFC-12 and CFC-11 are reported, together with data concerning the less abundant species.     

A new method for the determination of the 34S/32S ratio of water-soluble sulphur in soil

A new method for the determination of the ³⁴S/³²S ratio of water-extractable sulphate in soil is described. Soils are extracted directly with deionized water, which is evaporated down. The remaining residue is then rehydrated and transferred to tin cups containing an adsorbent and mixed with an oxygen donor (V₂O₅). Samples are then analysed using a continuous flow isotope ratio mass spectrometer. The new method requires around 10?g soil per determination, compared to much larger amounts (up to kilograms) of soil required for the previous methods. Sample preparation and subsequent analysis is quick and efficient. The method is demonstrated using a number of soils collected from around the world to provide a range of determined δ³⁴S values. The δ³⁴S values of water-extractable sulphur were broadly similar to those of the soil total sulphur.     

Dispersive liquid–liquid microextraction and spectrophotometric determination of cobalt in water samples

A new simple and rapid dispersive liquid–liquid microextraction has been applied to preconcentrate trace levels of cobalt as a prior step to its determination by spectrophotometric detection. In this method a small amount of chloroform as the extraction solvent was dissolved in pure ethanol as the disperser solvent, then the binary solution was rapidly injected by a syringe into the water sample containing cobalt ions complexed by 1-(2-pyridylazo)-2-naphthol (PAN). This forms a cloudy solution. The cloudy state was the result of chloroform fine droplets formation, which has been dispersed in bulk aqueous sample. Therefore, Co-PAN complex was extracted into the fine chloroform droplets. After centrifugation (2 min at 5000 rpm) these droplets were sedimented at the bottom of conical test tube (about 100 µL) and then the whole of complex enriched extracted phase was determined by a spectrophotometer at 577 nm. Complex formation and extraction are usually affected by some parameters, such as the types and volumes of extraction solvent and disperser solvent, salt effect, pH and the concentration of chelating agent, which have been optimised for the presented method. Under optimum conditions, the enhancement factor (as the ratio of slope of preconcentrated sample to that obtained without preconcentration) of 125 was obtained from 50 mL of water sample, and the limit of detection (LOD) of the method was 0.5 µg L^?1and the relative standard deviation (RSD, n = 5) for 50 µg L^?1 of cobalt was 2.5%. The method was applied to the determination of cobalt in tap and river water samples.     

Separation of Hydrocarbon Mixtures in the Microgram Range by Inclusion in a Urea-packed Mini Column

Abstract

The use of classical urea inclusion techniques for the separation of straight chain hydrocarbons from branched and cyclic compounds is satisfactory when applied to mixtures in the milligram to gram ranges, but leads to low separation efficiencies when quantities in the microgram to milligram range are involved. In this study, a modified inclusion technique using an urea-packed milli-bore column and a catalytic eluent is described. Examples of its use for the separation of mixtures of linear and cyclic hydrocarbons from 30μg up to a few milligrams are given. The versatility of this technique for the analyses of low amounts of environmental samples is described, and an application to the hydrocarbon fraction of surface sediment from lake Leman (Switzerland) is presented.     

Solid-Phase Extraction and Capillary Gas Chromatographic Determination of Triazine Herbicides in Water

Abstract

A facile and efficient method is described for the determination of trace quantities of triazine herbicides, terbutryn, prometryn and ametryn in water. The procedure involved preconcentration of water samples by sorption on chromatographic grade silica gel particles with chemically modified surface, being covalently bonded with a nonofunctional C₈H₁₇ group. This was followed by solvent desorption with 2-propanol. The determinative step was achieved by capillary gas chromatography on Supelcowax-10 fused silica column using a nitrogen-phosphorus detector. The limit of detection was 0.1 μg-10 μgL^?1.     

Octapeptide-Specific and Sensitive Assay for Angiotensin II in Plasma

Abstract

Angiotensin-(1–8)octapeptide (angiotensin II) is the active principle of the reninangiotensin system. Crossreaction of angiotensin II-antisera with inactive precursors and metabolic fragments prevented the specific quantitation of this hormone in biological fluids. Peptide-extraction on bonded-phase silica followed by peptide-separation using isocratic reverse-phase high performance liquid chromatography and subsequent radioimmunoassay rendered possible the octapeptide-specific measurement of angiotensin II in 2 ml plasma with a detection limit of 0.4fmol/ml. The coefficient of variation for intra-assay precision was 0.06 and for inter-assay precision 0.13. ¹²⁵Iangiotensin II was recovered from plasma by solid-phase extraction to 99±2% (mean ± S.D.). The overall recovery of 5, 10 and 20 fmol unlabeled angiotensin II added to plasma was 80±10%. Plasma concentrations in supine normal humans averaged 4.1 ± 1.6 fmol/ml and were suppressed below the detection limit by angiotensin I converting enzyme inhibition.